Exile X2400.1 User Manual download pdf (Page 25)

PLATEN ACCURACY

This test checks the stepping accuracy of the TechSetter and prints the nominal distance

lines with inch annotations. A sample pattern is shown in Fig. 5. Selections of different

lengths ranging from one to eight feet and of different patterns (normal grid, filled, or

blank interior) are available. The printed image may be measured with an accurate scale

to determine the platen accuracy. In case that the platen accuracy adjustment is needed in

the Closed-loop Control ON: Absolute mode, the Plot Calibration or the Open-loop

Check test may be applied (please refer to Section 4.3 Advanced Tests).

FIG. 5

PLATEN ACCURACY TEST PATTERN

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

No comments

Exile X2400.1 User Manual Page 25